Automatic Doors

The Disability Discrimination Act (DDA) requires those responsible for buildings to make some provision for disabled access into the building. To meet this requirement, Ansador Ltd offers a full range of operators for automatic doors and can be fitted onto both new or existing doors.

The LCN automatic door range offers the more unique feature of being operated through compressed air which can be adjusted when opening and closing. This means that a door that would normally be too heavy for somebody to operate can be made to feel very light to the touch as compressed air would assist the unit upon opening.

The range of GEZE automatic doors offer various sizes to suit almost any application. Care needs to be taken when specifying the usage of the door and the direction of opening etc. These units can be linked to an access control system such as a card reader, keypad, or intercom so when the visitor arrives the door will not only unlock but automatically open and re-close.

Alternatively the unit can be set to fully automatic and will open and close the door on whatever basis is required. The units can also be set to open on impulse from a fire alarm activation and stay open if necessary to assist in ventilation and evacuation procedures.

The systems need to be set up in accordance with BS7036 to ensure they are correctly specified for the purpose and are fitted with the appropriate safety circuits. These can include presence detectors, hinge guards to stop fingers getting caught, ,and a variety of other safeguards.

Ansador also provide a range of automatic sliding doors designed to provide a safe and efficient controlled access system to meet those requirements where swing door operators are not appropriate.

The swinging and sliding doors can all be controlled by card access, coded access or indeed any of the access control systems elsewhere in this web site.

Systems

Bi-folding door operator

•For bi-folding doors with intensive use
•FAAC 560 is designed for automating bi-folding doors, it is fixed on one leaf only, and opens and closes by means of a telescopic arm.
•The FAAC Hydraulic system and guide with a telescopic arm ensure even, perfectly linear movement.
•The electric motor, hydraulic pump and internal rack-and-pinion transmission system are compactly housed in a single block in anodised
aluminium.
•Thanks to the built-in hydraulic adjustable by-pass valves. The anti-crushing protection can be set for the most suitable environment.
•The manual release enables you to open the door in the event of a power-cut or an emergency. The control board can add more safety depending on your requirements.

930 sliding door operator

•Electro-mechanical operator for sliding doors
•Available in self-assembly kit form or in made up complete head sections.
– Electromechanical operator for single or double leaves
– Maximum weights: Single panel 120kg; Double panel 80kg + 80kg
– Toothed belt drive
– Modular extruded aluminium profile
– Side-fixing version available
– Optional battery backup
– 930 SD control unit
– Opening speed and closing speed – Single panel 10~ 90 cm/sec Double panel 20~180cm/sec
– Electronic safety control
– Controlled by SD keeper
– Breakout system available
– Pause time 0 to 90 sec
– Anti-crush activation at open/closing
– Full range of safety and activation devices available

A100 slim line sliding door operator

•Slimline automatic door operator
•Electromechanical operator for single or double leaves
•Height 100mm x 150mm
•Max weight: single panel 110kgs, double panel 70kgs + 70kgs
•Modular extruded aluminium profile
•Backup battery with 20 minutes continuous use in case of power failure
•Programmable speed: opening & closing 5-70cm/sec (single panel), 10-14cm/sec (double panel)
•Pause time adjustment 0-30 sec
•Electronic safety control
•Designed for continuous operation 100% duty cycle
•Controlled by SD keeper
•Self-learning of maximum speed according to leaf weight and friction
•Full range of safety and activation devices available

950 Swing door operator

•Low Voltage electro-mechanical operator for swing doors
950 BM – with spring system
950 BSM -with spring-less motorised system
•The 950 BM and 950 BSM can be installed either on the door lintel or on the door itself.
•The housings innovative shape and considerable styling impact, added to an anodised metal type surface finish, make it very special. Due to the shape of the housing, a detection sensor (radar or passive infra-red) can be installed inside.
•The operator works in harmony with its transmission arm providing near silent operation.
With the 950 MPS and 950 I/O (input/output board), intelligent control is assured
•You can select the operation logic (automatic, manual, night, open) with a selector built in to the automated system.
•The product is sturdy, reliable and above all, safe.
•In compliance with current safety regulations, speed and force are programmed according to the door’s dimensions. If the door meets an obstacle, it re-opens immediately and, when it closes the next time, it verifies clearance of the obstacle at slow speed.