|
 |
|
Electric Gates are an effective and surprisingly low cost way of controlling access into an area. ANSADOR have extensive experience at designing and installing automatic gates. Our service extends to the design of the gates, automation system, access control and provision of power if necessary.
There are a range of pre-designed electric gates available to suit most entrance ways.
Steel gates are normally finished in galvanised or red oxide finish but can be painted to almost any colour. There are two main choices of automatic operator for swing gates. Underground operators and hydraulic rams are suited to almost any application assuming there is room to install it on the back of the gate. |
| _ |
 |
| |
Sliding electric gates offer greater security as the gate can lock into place at each end of the span. The gates are then rolled back and forth by the motor usually on the secure side of the gate. Most of the gate systems installed utilise a single 240v power supply at 5 amps. Safety circuits are installed as a matter of course and include photo beams, safety edges and loop induction circuits to detect metallic mass. Activation of the gates is usually provided by the radio transmitters from within the vehicle. Visitors can use conventional intercom units or the new telephone linked systems which offer a useful alternative as they can link into the standard BT phone within the house or office. |
| |
 |
|
|
