Salto Card Access

Wirefree Card Access Systems

About Salto
How Salto Works
Salto Installation Enquiries
Salto Trade Enquiries

Salto Card Access

ANSADOR are pleased to announce they now supply and install the SALTO Access Control System, a new concept in securing buildings by overcoming the limitations of traditional wiring needed for access control systems.

The card readers are built into the door handles allowing a wire free installation. The user simply offers the pre-programmed card to the door handle to unlock the door.

How Salto Works

The SALTO solution is based on a new electronic locking system that offers a choice of different card readers built into the door handle including…

iButton ID-carrier
Smart Card
Proximity Card

The system will still offer all the advantages of a wired system though including

Full audit trail
Access level and time zones
Integration with door intercom and CCTV
External rated readers
Linked to a pc for ease of management.

Together with Stand alone electronic locks for individual doors which not only 'read' but also 'write' to cards Wired 'on-line' readers reporting to a PC

The audit trail for the 'stand alone' locks and readers is downloaded onto the card whenever it is used, which then downloads onto the 'on-line' system when it is used on that reader. For 'stand alone' locks only a hand held Portable Programming Device is used which acts as a messenger between the door and the PC for programming and downloading information.

Ansador Slato Installation Service

Energy saving devices now add a new dimension to the range allowing the building owner to limit and reduce energy consumption in buildings to valid card holders only.

Old Key technology can now be changed to modern card readers built into the cylinder

The ANSADOR team will be pleased to provide more information and demonstrate the benefits of the new SALTO system, single door access systems, proximity card access, swipe card access, smart card access and hands free card access systems.

Ansador as a certified Salto partner can supply Salto products for installation. Ansador can give you advice on which Salto system and products will best suit you needs, plan out how they systems will integrate into your current or new build and have their Salto approved installers carry out the work.

Use the contact form below to get in contact with us about your requirements.

Ansador Slato Trade Enquiries

Ansador as a certified Salto partner can supply Salto products through trade. If you're taking on a project and looking for a reliable and approved supplier of Salto products Ansador can help. We offer Salto products from large project bulk orders down to small installation Salto systems.

We can provide advice on which Salto projects would suit your requirements best and we can supply and provide you with the Salto equipment.

Use the contact form below to get in contact with us about your requirements.

Or you can contact us on our Salto trade enquiries number: 020 7223 3645

Salto Products and Systems

Salto slim line handle set

This unit fits the majority of standard latch locks...

View More

Salto slim line handle set with built in Mifare card reader on the outside.

This unit fits the majority of standard latch locks and contains the handles, batteries and Mifare reader using the benefits of the Salto virtual network. It can be operated by contactless card, (new text) contactless fob or even mobile phones equipped with NFC (Near Field Communications) technology.

More

.
Salto wide bodied handle

This unit is particularly useful when fitting...

View More

Salto wide bodied handle set with built in Mifare card reader on the outside.

This unit is particularly useful when fitting to a location where we have removed the existing handles as it will cover the marks left by the removal of the old handle set. The unit fits most standard latch locks and contains the handles, batteries and Mifare reader using the benefits of the Salto virtual network.

More

.
Salto PPD

This unit comes as standard on all installations and provides the client...

View More

Salto PPD

This unit comes as standard on all installations and provides the client with the ability to transfer information to and from handles/locks. It will also override the system if required to gain entry if set up to do so. It would usually reside in the holster by the clients PC.

More

.
Salto card encoder.

As the name suggests the unit comes with software...

View More

Salto card encoder.

As the name suggests the unit comes with software and allows the client to programme cards on site. We would usually provide cards but can also programme clients existing Mifare cards to different sectors if required.

More

.
This Salto euro profile cylinder

This comes with a card reader built into the end of the...

View More

This Salto euro profile cylinder

This comes with a card reader built into the end of the cylinder where a key would typically be inserted. The inside has a standard turn knob allowing for free exit. This is designed to be fitted into existing latch locks where the latch is operated by the existing cylinder.

More

.
Salto i-locker.

This unit is designed to substitute standard locks on locker doors....

View More

Salto i-locker.

This unit is designed to substitute standard locks on locker doors. The unit will allow for access control and audit trail to standard lockers at offices, hotels, sports clubs etc.

More

.
Salto wall mounted card reader.

This unit is fitted to the wall...

View More

Salto wall mounted card reader.

This unit is fitted to the wall outside the door and is most often designated as being an on line reader and connects to the software through the clients network. Once fitted the unit will provide standard access control functions and will also update all cards with new information such as ‘black lists’.

More

.
Salto handle and card reader.

This unit is fitted to the wall outside the door and...

View More

Salto handle and card reader built specifically for a glass door.

This comes with a latch lock and also a custom made keep for the other door or bracket. It can be operated by contactless card, contactless fob or even mobile phones equipped with NFC (Near Field Communications) technology.

More

.
Salto wall mounted card reader.

This unit allows clients to...

View More

Salto Mifare reader with keypad.

This unit allows clients to enjoy additional security by using a Mifare proximity card accompanied with a PIN number. This is normally put on line and is connected via a small control unit to the clients Lan/wan.

More

.
Salto Interface module.

This unit is normally for the purposes of triggering...

View More

Salto Interface module.

This unit is normally for the purposes of triggering secondary units such as lift control on elevators etc. It has 8 standard outputs as a matter of course.

More

.