Salto slim line handle set with built in Mifare card reader on the outside.

This unit fits the majority of standard latch locks and contains the handles, batteries and Mifare reader using the benefits of the Salto virtual network. The unit can be operated by card or even phones with the NFC Near field communication.

Salto wide bodied handle set with built in Mifare card reader on the outside.

This unit is particularly useful when fitting to a location where we have removed the existing handles as it will cover the marks left by the removal of the old handle set. The unit fits most standard latch locks and contains the handles, batteries and Mifare reader using the benefits of the Salto virtual network. The unit can be operated by card or even phones with the NFC Near field communication.

Salto handle and card reader built specifically for a glass door.

This comes with a latch lock and also a custom made keep for the other door or bracket. The unit can be operated by card or phones with the NFC Near field communication.

This Salto euro profile cylinder

This comes with a card reader built into the end of the cylinder where a key would typically be inserted. The inside has a standard turn knob allowing for free exit. This is designed to be fitted into existing latch locks where the latch is operated by the existing cylinder.

Salto wall mounted card reader.

This unit is fitted to the wall outside the door and is most often designated as being an on line reader and connects to the software through the clients network. Once fitted the unit will provide standard access control functions and will also update all cards with new information such as ‘black lists’. It will also allow the system information such as an audit trail and battery information to be transferred to and fro via the card using the Salto virtual network..

Salto Mifare reader with keypad.

This unit allows clients to enjoy additional security by using a Mifare proximity card accompanied with a PIN number. This is normally put on line and is connected via a small control unit to the clients Lan/wan

Salto Interface module

This unit is normally for the purposes of triggering secondary units such as lift control on elevators etc. It has 8 standard outputs as a matter of course.

Salto i-locker.

This unit is designed to substitute standard locks on locker doors. The unit will allow for access control and audit trail to standard lockers at offices, hotels, sports clubs etc.

Salto PPD

This unit comes as standard on all installations and provides the client with the ability to transfer information to and from handles/locks. It will also override the system if required to gain entry if set up to do so. It would usually reside in the holster by the clients PC.

Salto card encoder.

As the name suggests the unit comes with software and allows the client to programme cards on site. We would usually provide cards but can also programme clients existing Mifare cards to different sectors if required.